by cfbi1 | Apr 9, 2017 | Home Inspection
Just as it’s important to keep up with recalls on toys, or child car seats, it’s also vitally important to know when something major on a home product has a recall. As example, in 2009*, homes built in 2004-2005 all had AFCI Breakers installed in the home. It turned out that the Square D breaker with a blue reset button was not detecting the electrical arc as it should, which is a hazard to residents.
The Consumer Product Safety Commission sent out an alert recalling that particular part. Home inspectors are given a list of safety guidelines and any product recall that are hazardous to a house. The most recent recalls posted via the CPSC website are gas fireplaces and “fireplace inserts due to explosion hazards,” another is a Dyson product recall.
As homeowner’s it is important to maintain the home, such as clear out the gutters during the year. In addition to checking for any loose shingles on the roof, walking around the home’s foundation looking for cracks, all of these are a small part of owning a home. The other part is keeping track of consumer product recalls that could be a safety risk to you and your family.
One quick way of finding out if any of the electrical wiring is not up to safety standards is to have a 4-point inspection. It is not necessary to have all the four major systems inspected, you can elect to have one of the major systems inspected instead of all of them, which saves on costs.
Too often, people get an inspection at the time of a purchase and then forget about the service. However, choosing to have a routine home inspection every five years or so assures you that your home is still safe to live in.
*Article Resource:
AFCI Breaker Recall Info
by cfbi1 | Apr 8, 2017 | Home Inspection
It is the usual time of year where homeowner’s and renter’s replace and/or check the batteries of the smoke alarms in their homes. Many just buy the 9v batteries and switch them out. In order to keep houses safe from fire it is essential to do the research on the most up-to-date info regarding smoke alarms. For instance, ASHI recommends that homes have photoelectric alarms installed over ionization alarms.
What is a Photoelectric Smoke Detector?
There are two different types of fires that can happen in a home, the first is a flaming, and the second is a smoldering fire. Typical examples of a flame-igniting fire are burning toaster, or cooking fire. Smoldering fires can happen because of a cigarette left or old wiring, this type of fires mostly produces smoke and sometime no flame.
Photoelectric detector is quicker to respond to a smoldering flame and an open flame in comparison to the ionization alarm systems. A study proved that “in smoldering-ignition fires, the probability of fatality due to failure of the alarm was 55.8% for ionization alarms vs. 4.06% for photoelectric alarms.”
Are the Smoke Alarms installed in Proper Locations?
It is important to install the detectors on every level and in sleeping areas to make sure occupants are warned in the appropriate amount of time to get out of a burning home. Try not to install them near the corners of the ceiling and walls.
Check the Date on all Alarms
Before just replacing the batteries in your current smoke alarms and then forgetting about it, check the back of the alarm for the date it was manufactured. If that date is over 10 years, it needs replacing.
Invest in Wireless & Interconnected Smoke Detectors
To keep you and your family safe from being trapped inside your home in case of fires, look into wireless and interconnected systems. This is especially important if the home is multi-level and does not have hardwired alarm system installed in the walls. Wireless alarms work in a way that if one is triggered the others are triggered too.
At Central Florida Building Inspectors, Inc. it’s a priority to keep families safe!
